MGB Technical
Log in to post new content in the forum.
| Thread heading | Started by | Messages |
Last updated |
|
|---|---|---|---|---|
| Overdrive switch on gearbox | MR SCOTT KENNEDY |
3 |
Sunday, June 8, 2008 - 23:06 | |
| Sticking Valve | MR ROGER SHACKLETON |
2 |
Sunday, June 8, 2008 - 21:55 | |
| what needles? | MR PAUL JOHNSTON |
5 |
Sunday, June 8, 2008 - 13:22 | |
| overdrive /gearbox | MR A CROSS |
4 |
Sunday, June 8, 2008 - 10:11 | |
| Splash plates | GED WEST |
6 |
Saturday, June 7, 2008 - 21:40 | |
| Nearside Indicator | Andy Johnson |
0 |
Saturday, June 7, 2008 - 16:07 | |
| Engine turns but won't fire.. | MR RICHARD CRAIG |
4 |
Saturday, June 7, 2008 - 11:32 | |
| Not picking up easily when starting | PeterL |
1 |
Friday, June 6, 2008 - 23:56 | |
| Engine Block | NICK PARRANS-SMITH |
4 |
Friday, June 6, 2008 - 19:41 | |
| Tappet Adjustment tips | Gary Westbury |
15 |
Friday, June 6, 2008 - 09:46 | |
| wires? | MR RAY JONES |
1 |
Friday, June 6, 2008 - 07:13 | |
| mmmm | MR RAY JONES |
9 |
Thursday, June 5, 2008 - 19:33 | |
| Engine fais to start when hot | Paul Truscott |
3 |
Thursday, June 5, 2008 - 08:17 | |
| Recomended engine rebuilders | John Dempsey |
9 |
Thursday, June 5, 2008 - 06:13 | |
| Differential Rebuild | MR DAVID YATES |
3 |
Wednesday, June 4, 2008 - 22:12 | |
| Can I swap the rear axle | Paul Hoath |
11 |
Wednesday, June 4, 2008 - 17:49 | |
| GT door rebuild | MR BRYAN TWITTY |
1 |
Wednesday, June 4, 2008 - 16:50 | |
| Clutch Flywheel bolts | DR JAMES HARRISON |
6 |
Wednesday, June 4, 2008 - 15:33 | |
| Boot racks | Kev Meers |
20 |
Wednesday, June 4, 2008 - 11:09 | |
| Distributor | MR WALTER TEE |
2 |
Wednesday, June 4, 2008 - 11:01 | |
| Soldering poppet valves | Rob Brandreth |
11 |
Tuesday, June 3, 2008 - 23:44 | |
| Rear shocks conversion | Rod Smith |
6 |
Tuesday, June 3, 2008 - 23:04 | |
| Drilling glove box lock | Iain Cameron |
8 |
Tuesday, June 3, 2008 - 21:05 | |
| Thermostat Housing | Ged |
2 |
Tuesday, June 3, 2008 - 20:46 | |
| Fuel variations | MR A CROSS |
5 |
Tuesday, June 3, 2008 - 18:45 | |
| Stupid question | Ken Harris |
2 |
Tuesday, June 3, 2008 - 17:23 | |
| bendy bracket???? | MR MATTHEW LAWRENCE |
28 |
Tuesday, June 3, 2008 - 16:57 | |
| Fuel tank leak? | MR JOHN DAVIES |
6 |
Tuesday, June 3, 2008 - 16:51 | |
| Slave (Clutch) | Alan |
3 |
Tuesday, June 3, 2008 - 16:22 | |
| Unleaded Fuel | Ged |
6 |
Tuesday, June 3, 2008 - 15:59 | |
| SSE - single box system | MR BRYAN TWITTY |
7 |
Tuesday, June 3, 2008 - 15:16 | |
| Help required in Rochdale area | MR PAUL HAYDEN |
0 |
Tuesday, June 3, 2008 - 12:55 | |
| Help needed please | MR NEIL STARKIE |
6 |
Monday, June 2, 2008 - 22:56 | |
| Leaking Garage | MRS J MCDERMOTT |
8 |
Monday, June 2, 2008 - 21:42 | |
| Whits end - non-starting | MR DARREN PAINE |
17 |
Monday, June 2, 2008 - 15:10 | |
| Engine Number | MR M CORNWALL |
10 |
Monday, June 2, 2008 - 11:50 | |
| Fitting Inertia seat belts | MR CHRISTOPHER CHADAWAY |
2 |
Sunday, June 1, 2008 - 20:15 | |
| carb overflow tips | IAN SMITH |
9 |
Sunday, June 1, 2008 - 20:03 | |
| Wrong Bearings ?? | MR STEPHEN BUTTERY |
8 |
Sunday, June 1, 2008 - 19:59 | |
| Gearbox / overdrive | David Walton |
3 |
Sunday, June 1, 2008 - 19:26 | |
| Engine Bay clean up 1981 'B' | MR A CROSS |
9 |
Sunday, June 1, 2008 - 15:11 | |
| starter | MR RAY JONES |
0 |
Sunday, June 1, 2008 - 14:28 | |
| MGC Wires | MR DANIEL PAUL |
2 |
Sunday, June 1, 2008 - 14:06 | |
| Hi-Lift Cam Clearances | Matt Pammenter |
2 |
Sunday, June 1, 2008 - 01:27 | |
| VALVE GUIDE REMOVAL | MR MARTIN POOR |
3 |
Saturday, May 31, 2008 - 22:40 | |
| poor running woes | MR A CROSS |
5 |
Saturday, May 31, 2008 - 18:49 | |
| Engine Oil | MR ADRIAN WESTFIELD |
7 |
Saturday, May 31, 2008 - 18:39 | |
| Heater Box Rubber Seal | Peter Ugle |
4 |
Saturday, May 31, 2008 - 18:11 | |
| Diff question | Graeme Don |
2 |
Friday, May 30, 2008 - 20:13 | |
| speedometer | Mick Rae |
11 |
Friday, May 30, 2008 - 18:47 |
Log in to post new content in the forum.