Midget Technical
Log in to post new content in the forum.
| Thread heading | Started by |
Messages |
Last updated | |
|---|---|---|---|---|
| Clutches and Vibration | Dave Wellings |
0 |
Saturday, December 18, 2004 - 18:42 | |
| midget chrome conversion | ANT7T5 |
0 |
Saturday, June 7, 2003 - 15:16 | |
| Pertronix in 1500 midget - will rev counter work | Stuart Longstaff |
0 |
Sunday, May 18, 2008 - 18:50 | |
| Inertia Seatbelt fitting | Andy Broadbent |
0 |
Monday, March 31, 2003 - 12:42 | |
| Hard Tops | MR MICHAEL FLANAGAN |
1 |
Wednesday, May 18, 2011 - 20:31 | |
| Tappets | KEN HARRIS |
1 |
Thursday, May 18, 2006 - 20:46 | |
| Headlight conversion | MR LLOYD MCINALLY |
1 |
Monday, November 21, 2005 - 22:16 | |
| Re-plumbing crankcase breather circuit | Matt Rooke |
1 |
Tuesday, February 11, 2003 - 10:45 | |
| 1500 Engine Earthing Strap | MR ROY HEDGER |
1 |
Sunday, April 9, 2006 - 19:09 | |
| 1500 fuel pipe route | Jim. P. |
1 |
Sunday, October 10, 2021 - 19:33 | |
| 1500 head gaskets | MR ALEC FROST |
1 |
Wednesday, July 20, 2011 - 13:09 | |
| cough...cough | Peter Meredith |
1 |
Monday, June 19, 2006 - 14:09 | |
| Wire wheeled woe. | Howard Edgar |
1 |
Tuesday, November 4, 2003 - 20:33 | |
| New 25d4 fitted now iam going electronic any ideas | MR JAMES STEPHENSON |
1 |
Thursday, May 8, 2008 - 07:42 | |
| Wiring in hazard lights | MR LLOYD MCINALLY |
1 |
Monday, September 19, 2005 - 16:52 | |
| Temp Guage not working | MR ROBERT HIGGS |
1 |
Monday, May 1, 2006 - 18:20 | |
| Differential Thrust Washer Planet Gear | Chris |
1 |
Sunday, April 28, 2024 - 13:38 | |
| Door rust | DR PETER WHITTLE |
1 |
Wednesday, September 10, 2003 - 22:13 | |
| air filters | MR TERRY HOGAN |
1 |
Tuesday, May 21, 2002 - 22:31 | |
| Greasing Rear Springs | Rob Higgs |
1 |
Tuesday, April 5, 2005 - 12:58 | |
| breathers missing | MR GRAHAM PRIOR |
1 |
Saturday, January 18, 2003 - 17:22 | |
| 1500's loss of power | Geoff King |
1 |
Sunday, February 19, 2006 - 20:42 | |
| handbrake cable replacement | MISS JENNY RUST |
1 |
Tuesday, April 8, 2003 - 20:28 | |
| MKII Midget Re-shell | KEN HARRIS |
1 |
Tuesday, June 6, 2006 - 19:41 | |
| Starter Motor | Mr Craig McLachlan |
1 |
Tuesday, June 14, 2005 - 22:59 | |
| Broken Spoke | MRS VICTORIA TWEED |
1 |
Monday, July 7, 2008 - 21:56 | |
| Electronic Ignition Anybody ? | MR A ALLEN |
1 |
Wednesday, October 2, 2002 - 09:14 | |
| 79' Midget Cooling Hoses | MR GRAHAM PETERS |
1 |
Monday, November 21, 2005 - 21:23 | |
| Tappets | MR MARK MASON |
1 |
Wednesday, January 17, 2018 - 16:03 | |
| Door catching | DAVE WELLINGS |
1 |
Monday, February 17, 2003 - 15:02 | |
| Electronic ignition / +ve earth | PsychoWarthog |
1 |
Saturday, July 7, 2012 - 09:47 | |
| Servo fitted - still soft pedal! | MR LLOYD MCINALLY |
1 |
Monday, December 18, 2006 - 21:53 | |
| fulcrum pin grease nipple | Brian Watts |
1 |
Monday, October 24, 2016 - 19:26 | |
| K series conversion | MR PAUL PATTERSON |
1 |
Wednesday, May 23, 2007 - 16:13 | |
| Midget window winder screw thread size?? Help please! | MR PHILIP STEDMAN |
1 |
Wednesday, July 4, 2018 - 19:32 | |
| Overspray on vinyl | MR K BINNS |
1 |
Monday, July 4, 2005 - 21:13 | |
| BBS and Website Improvements | RICHARD MONK |
1 |
Friday, July 17, 2009 - 16:40 | |
| ARE MIDGET HEADRESTS SAME AS MGB | FRANK AMEY |
1 |
Friday, November 29, 2002 - 13:02 | |
| Overheating problem | MR KEITH WINDSOR |
1 |
Sunday, July 1, 2001 - 17:57 | |
| alternative engine | MR DOUGLAS R BEALES |
1 |
Sunday, December 20, 2015 - 12:00 | |
| Midget Problem | MR CHRIS PRATT |
1 |
Thursday, May 30, 2002 - 23:11 | |
| Engine paint | MR MICHAEL KAY |
1 |
Tuesday, April 9, 2019 - 19:51 | |
| 1275 Inertia starter motor | MR MARTIN GREEN |
1 |
Sunday, June 7, 2020 - 11:45 | |
| wheel cylinders | MR GRAHAM BATES |
1 |
Saturday, January 25, 2003 - 21:43 | |
| Production Run | Mr Bump |
1 |
Tuesday, October 22, 2013 - 18:57 | |
| bonnet chrome strip | Peter Smout |
1 |
Monday, February 27, 2006 - 13:29 | |
| Metal thickness | MR MARK TEAL |
1 |
Sunday, May 3, 2009 - 21:53 | |
| Clutch release bearing? | MR IAN YEMM |
1 |
Friday, June 10, 2005 - 16:16 | |
| turning engine by hand | MR STEVE CHURCH |
1 |
Tuesday, November 29, 2005 - 12:56 | |
| Wheel stud threads | Dave Wellings |
1 |
Monday, April 17, 2006 - 17:27 |
Log in to post new content in the forum.